| ||
 | ||
Click here to enter Main Mason-UK website | ||
Neoprene Mounts | ||
| Available in neoprene or natural rubber with a load range of 7 - 2000kg. Generally used to isolate mechanical plant and machinery as well as wooden floating floors. | ||
| Click Here for more information on Neoprene Hangers | ||
Super W Pads | ||
| Pad size = 51 x 51 x 19 available in neoprene or natural rubber. Sheet size = 457 x 457 with 9 x 9 or 81 pads. Nominal load for 40 durometer pad in natural rubber = 60 kg. | ||
| Click Here for more information on Super W Pads | ||
Bases | ||
| Bases vary from a simple steel frame to connect spring mounts to the equipment to large concrete filled frames to provide large inertial mass. We can engineer frames to suit project requirements in terms of size, mass and finish. | ||
| Click Here for more information on Bases | ||
Flexible Pipe Connnectors | ||
| Masonflex Neoprene connectors are all designed with
multiple piles of DuPont Kevlar tire cord and Neoprene reinforcement. They are
moulded in hydraulic rubber presses where high pressure air bags expand inside
the preforms to force the carcasses against the mold walls. Mason flex has been sold without interruption for approximately 25 years. In this lastest improved version the Kevlar reinforcement replaces Nylon to greatly reduce elongation and to provide virtual insensitivity to high temperatures. We have also changed the end designs to incorporate a solid steel ring under the split retention flanges. The use of a solid steel ring in place of the bead wire completely eliminates the problem of the rubber flange pulling out of the steel flange and causing major failures. These rim failures have been industry wide, and eliminating this worry more than justifies the use of Masonflex in place of competitive products. | ||
| Click Here for more information on Flexible Pipe Connnectors | ||
Spring Mounts | ||
| Mason has a complete range of spring mounts both open and closed and also restrained housings where weight change occurs such as with cooling towers. Deflection range = 25mm - 125mm | ||
| Click Here for more information on Spring Mounts | ||
Isolation Bearings | ||
| We can provide isolation bearings for simple structures or complete buildings. A typical installation would be the raked seating steel framework in a cinema. Isolation bearings may be used in the form of single or multi-layered neoprene pads or spring isolators. We can engineer bearings to suit the project requirements of natural frequency and load. | ||
| Click Here for more information on Isolation Bearings | ||
Type WIC - Isolated Walls | ||
| Low profile, low cost wall tie. Minimum cavity = 40mm. For the construction of acoustically isolated walls. | ||
| Click Here for more information on Type WIC - Isolated Walls | ||
Type WIC-SM - Isolated Walls | ||
| Masonry wall tie to connect two masonry walls built together. No limit on cavity or wall thickness. For the construction of acoustically isolated walls. | ||
| Click Here for more information on Type WIC-SM - Isolated Walls | ||
Type DNSB - Isolated Walls | ||
| Low frequency wall tie. Bolt end for stud walls or hooked end for masonry walls. For the construction of acoustically isolated walls. | ||
| Click Here for more information on Type DNSB - Isolated Walls | ||
Type SWW - Isolated Walls | ||
| Masonry wall isolation strips designed to suit width and load of wall. For the construction of acoustically isolated walls. | ||
| Click Here for more information on Type SWW - Isolated Walls | ||
Type NPS - Isolated Walls | ||
| Neoprene Partition Support to isolate the bottom channel of steel stud walls, held in place by a frame or hammer fixing. For the construction of acoustically isolated walls. | ||
| Click Here for more information on Type NPS - Isolated Walls | ||
Type AB-716 - Isolated Walls | ||
| Angle head restraint for the top of the block and stud walls. | ||
| Click Here for more information on Type AB-716 - Isolated Walls | ||
|
| ||
Click here to enter Main Mason-UK website |
||
|
Website Shortcuts: Main Menu Company Contact Us Links Past Projects News Vibration Control Products: Spring Mounts Hangers Mounts Bases Flexible Pipe Connectors Isolation Bearings Suspended Ceilings Isolated Walls Products Summary Ceilings Summary |
Floating Floor Products: Jack-Up Neoprene Jack-Up Spring Form-Work Wooden Floating Floor Summary |
|