HDSM-A Joist Hanger

Joist or wall hanger with double deflection LDS rubber element. They can be fitted with a ceiling channel clamp or eye bolt.

HDSM-A Specification:

HDSM-A hangers consist of a side attachment steel angle gusseted on each side to prevent bending. The gussets protect an AASHTO bridge bearing quality LDS rubber element molded with an integral lock in grommet at the bottom to prevent steel rod to housing acoustical short circuiting. Dynamic Stiffness does not exceed 1.4 nor the corrected frequency 8 Hz. Housing configurations offered for simple attachment to 1.5″ x .5″ channels or 12 gauge wire.

Related Products

HDQF – Rubber Ceiling Hangers

HDQF quick fit ceiling hangers use high quality low dynamic stiffness natural rubber. This hanger has been designed to aid the contractor with a quick and easy installation of suspended acoustic ceilings.

HD-A Ceiling Hangers

The HD range of hangers is our most popular. The hanger uses a high quality low dynamic stiffness natural rubber element which offers excellent acoustic isolation properties.

HD-B Acoustic Ceiling Hangers

The HD range of hangers is our most popular. The hanger uses a high quality low dynamic stiffness natural rubber element which offers excellent acoustic isolation properties.

HDLP-A Low Profile Ceiling Hanger

The HDLP-A Hanger (PREVIOUSLY CALLED CRCH) has been designed as a low profile ceiling hanger and is used where floor to ceiling heights are critical. It uses the same rubber element as the HD-A and HDQF-A Hanger, and therefore has the same properties.

WHR Acoustic Ceiling Hangers

The WHR is a low cost ceiling hanger which still provides 5mm of deflection and is constructed from high quality low dynamic stiffness natural rubber which has natural acoustic isolation properties.

L.D.S Rubber Hangers

Acoustic, LDS (Low Dynamic Stiffness) rubber (previously neoprene) hangers can be used for suspending ceilings or mechanical plant.