PB Panel Board Mounts
PB Panel Board Isolators are used to resiliently mount cabinets or boards to a wall. They are designed to accept a shear loading and isolate the fixing at the same time.
The Panel board isolator consists of 3 resilient parts. One neoprene ring is placed behind the equipment to be mounts. The bushing then goes through a hole in the equipment and the second neoprene ring is placed over the bushing. The whole assembly is then clamped together with a suitable fixing.
The bushing is supplied with steel inner and outer sleeves to prevent the equipment, and the fixing bolt cutting into the neoprene, and over tightening of the bolt.
| Documents & Files |
|---|
Related Products
Super W Pad
Super W pads feature unique waffle pockets which allow for greater deformation of the material, providing excellent isolation performance. Super W anti-vibration pads can be supplied in multiple configurations to suit most situations.
HG Grommets Bolt Isolation Bushings
HG Grommets are rubber bolt isolation washer bushings designed to allow a fixing to be passed through without compromising the benefits of an anti-vibration layer.
W Pad
Waffle pad is a thin anti-vibration mat featuring a series of square cut outs which increase the amount of material which can deform under load.
Mini Super W Pad
Mini Super W pads feature unique waffle pockets which allow for greater deformation of the material, providing excellent isolation performance. Mini Super W anti-vibration pads can be supplied in multiple configurations to suit most situations.
ND – Double Deflection Rubber Mounts
ND Double Deflection Rubber Mounts are used to isolate mechanical plant and machinery as well as wooden floating floors.
BBNR Bridge Bearing Natural Rubber Pad
BBNR pads are 25mm thick anti-vibration pads that are available in a selection of sizes and load capacities. They can be applied to many applications, from the supporting of mechanical equipment, to the isolation of building structures.
RBA/RCA/RDA Mount
RBA / RCA / RDA mounts are fully captive isolators that can work in any orientation.
BR Restrained Captive Neoprene Mounting
The BR is an all directional captive bridge bearing neoprene mounting for seismic, mobile mounted equipment, marine, and wall hung applications such as commercial garage doors.
HLB/HLW – Neoprene Impregnated Duck Isolation Bushings & Washers
Our HLB & HLW Neoprene Impregnated Duck Isolation Bushings & Washers are used to isolate fixings by ensuring that there is no contact between the fixings and the brackets and or parts to be installed.
Anti-Vibration Rubber Mounts & Pads
Anti-vibration mounts & pads supplied by Mason U.K. are manufactured from high quality bridge-bearing neoprene or L.D.S rubber. Both materials are certified to meet or exceed applicable standards.
