Spring Hangers

Mason U.K. has a large range of spring hangers available to suit a wide variety of loads and acoustic requirements.

Spring hangers can be combined with elastomeric rubber elements to provide acoustic isolation across a wide frequency range. Spring hangers are typically used in locations subjected to impact and other very low frequency noise – typically sub 8Hz.

Steel coil spring hangers can offer lower natural frequencies than designs with rubber elements alone. We also can supply hangers with both rubber and spring, to provide acoustic isolation against high and low frequencies of noise and vibration.

Mason UK supply springs with a low ratio between height and coil diameter. This ensures that the spring remains stable, regardless of the amount of deflection.

If you would like to order or learn more about this product, please contact Mason UK’s acoustic engineers.

Documents & Files

Installation photos for Spring Hangers can be viewed here:

Related Products

HDQF – Spring Hanger

HDQF-X quick fit ceiling hanger (Spring Variant). This hanger has been designed to aid the contractor with a quick and easy installation of suspended acoustic ceilings.

30 Series – Acoustic Spring Hanger

The 30 hanger series can be fitted with a range of springs to suit acoustic and weight requirements. Spring hangers are used to isolate against low frequency noise from sources such as footfalls and mechanical vibration.

30N Series – Spring Hanger

The 30N hanger series can be fitted with a range of springs to suit acoustic and weight requirements. Spring hangers are used to isolate against low frequency noise from sources such as footfalls and mechanical vibration.

HDLP-X Low Profile Ceiling Hanger

The HDLP-A Hanger (PREVIOUSLY CALLED THE CRCH-X) has been designed as a low profile ceiling hanger and is used where floor to ceiling heights are critical. It uses the same spring element as the 30-X and HDQF-X Hanger, and therefore has the same properties.

HDSM-X Spring Joist Hanger

Joist or wall hanger with 25mm deflection spring element. They can be fitted with a ceiling channel clamp or eye bolt.

DNHS – Acoustic Spring Hanger

The DNHS series of hanger features both a metal spring and an LDS rubber element. This provides acoustic isolation against both low and high frequency vibration.

HS – Spring Hanger

The HS series of spring hanger allows for a wide range of springs to be used to suit both acoustic and load requirements.